free benbox laser engraver software download

Now my final opinion on this machine, well, it dose everything I expect it to do before buying it. You could play with the machine settings and try other materials. There you go, I’ve burned my first logo on a piece of wood. Make sure you open a window or have fume extractor since this will create a lot of smoke especially when you are engraving wood. Remember to disactivate the weak mode and we are now ready to print.Ĭhange your settings in the print config if you want and click play and the machine will start engraving. Press the laser push button to put it into weak mode and rotate the laser tip till you get a very small and well focused beam. Now make sure you have the safety glasses on, and that you’ve focused the laser. I’ve designed the file in Photoshop and save it in a BMP format. In the parameters you must place this same values as you can see in the photo above for X and Y movement as for the laser as well. If it says success than you are ready to go.

Upload and wait till you get a green check mark. Select the Com of the machine board and open the hexadecimal file that you have in the downloaded folder. Here click the update firmware in order to upload it to the board. Once that is done, install the benbox software and open it. First make sure you install the CH 340 driver. Inside you have the software but also the firmware for the main board in a hexadecimal format. Identify problems before sending to the laser.Download the zip file below and extract it.

Supports S-value laser code for true representation of result. Can be launched directly (registered users only) Tested with files containing over 7,500,000 lines of G-Code (trial is limited to 10,000 lines). Override laser power settings and feed rate in G-Code file. Laser on, off and pulse (using user configured power and time). User interface for jogging (8-way) with step distance and set / return home. Load G-Code files (supports both raster and vector formats). Supports Grbl 0.8, 0.9 (J-Tech branch is recommended for optimal performance) and 1.1. G-Code can be saved (registered users only). Allows basic image adjustment (brightness, contrast, flip and rotation). Image resize (uses an optimized algorithm to improve quality). Skip blank lines (improves engraving speed by eliminating unnecessary moves).

Horizontal or diagonal engraving (45 degree engraving makes lines less visible). Greyscale (S-value) and 1-Bit (dithered or threshold) conversion. Supports JPEG or BMP import (up to 24-bit color). For Grbl, Benbox and Eleks Maker Laser Engraving systems.

Free benbox laser engraver software download